To determine the likelihood of electric discharges in installations, it is necessary to know the resistivity of the dust used in the installation. The applied test equipment and procedure are in concordance with IEC 61241-2.2.

The significance of electrical resistivity of powders and dusts in the context of process safety is dual. First, the possibility of accumulating hazardous electrostatic charges and voltages in an industrial process increases with increasing electrical resistivity of the dust. Secondly, the chances that dusts which penetrate into electric and electronic equipment give rise to short circuits and equipment failure, increases as the dust resistivity decreases. From the point of view of the dust explosion hazard, both of these situations may lead to generation of ignition sources.

The test cell consists of two metal electrodes resting on a non-conducting base plate. The dust sample fills the gap (length 100 mm, height 10 mm, width 10 mm) between the electrodes. The resistance of the dust sample is measured for a number of different voltages applied across the gap. The resistivity of the dust is calculated from this measured resistance.

A powder is considered to be conductive, and therefore capable of shorting electrical or electronic equipment when present in this equipment, if the resistivity is less than 10³ Ωm.

Powders can give rise to electrostatic discharges if the resistivity exceeds 10¹⁰  Oh.

• IEC 61241-2.2 : Appareils électriques destinés à être utilisés en présence de poussière combustible, section 2 : Méthode de détermination de la résistivité électrique de la poussière dans des couches.
• EN ISO/IEC 80079-20-2:2016 : Atmosphères explosives – Partie 20-2 : Caractéristiques des matériaux – Méthodes d’essai pour les poussières combustibles, Section 8.4
• Ébauche DIN VDE 0170/0171 Partie 1502 : Appareils électriques destinés à une utilisation dans des zones à poussière combustible – Partie 2 : Méthodes d’essai – Section principale 2 : Méthode de détermination du résistance électrique des dépôts de poussière
• R.K. Eckhoff, Explosions de poussière dans les industries chimiques (1997)